This little DIY pilgrim wishes all of you the most wonderful Thanksgiving filled with love, friendship, and all the pie you can eat! xo
DIY: Riverdale Inspired Embellished Collar
I’m a bit of a TV addict (who else is a Netflix & Chill-er??) but when I watch, it’s not just for entertainment, it’s also for inspiration! I’m constantly getting outfit ideas from classic movies and TV series and this project is inspired by one of my faves...RIVERDALE! I’m obsessed with Betty’s embellished collars so I had to make one of my own. I snagged all my beads and rhinestones from JOANN to help get my DIY off the ground.
I snagged a thrifted white blouse as the base for my Betty lookalike and gathered all my shiny materials! To match Betty’s collar (which is Ted Baker) I needed some sew-on rhinestones, bugle beads, and thread to stitch them to the collar.
I opened all the bags of rhinestones to pull out the right stone sizes and colors to match Betty’s collar. Some round clear stones mixed with some pink ones were going to do the trick.
I had my computer open the entire time using the images I found of the collared top to guide me in my rhinestone and bead placement!
Once I knew where everything was going to go, I began stitching the clear stones to the collar first. I threaded my needle with white thread, tied a knot at one end and went in and out of the holes in the rhinestones securing them to the collar.
PS - I purchased the sew-on rhinestones to hand stitch the stones in place, however if you’re less inclined to use a needle and thread and want to craft your collar faster, regular rhinestones (without the holes) and some fabric glue will also do the trick!
With the clear stones stitched down…
I began to add the pink stones and silver bugle beads next until my collar was matching Betty’s!
Wanting to really match my Riverdale fave, I added a thin pink sweater on top of my blouse to complete the look.
I feel so studious, yet chic in this combo!
Betty isn’t the only embellished collar-wearer!
Veronica has killed this look as well.
An easy adjustment to make your look more Veronica chic, DIY a pearl necklace to lie right below the collar!
Taking some pearl beads, elastic, and a longer pearl charm, string your pearls, knot them, then use a ready made pearl charm or make your own with jewelry pliers and a headpin.
Since Veronica has a darker vibe, a mulberry-colored sweater was put on to really channel her aesthetic.
I feel like I totally belong in Riverdale!
Whether you’re a Betty or a Veronica...
...it’s easy to join the club!
DIY: Halloween Bob's Burgers Louise Belcher Costume
October is here! It’s my favorite month because of two things...my birthday falls right in the middle and HALLOWEEN! Costumes and costume making are up there on my favorites list and I’ve been planning this year’s ‘stume since I finished binging a certain show recently - Bob’s Burgers! Louise Belcher costume, coming right up! I snagged all my supplies from JOANN, including this XL tee that’s going to be the base of the costume!
On top of the shirt, I needed some wire and pink fleece for the ears as well as some green dye to match Louise’s dress color!
It’s dye time! I prepped my t-shirt and submersed it in water before tossing it into the washing machine and adding my dye.
The pre-wash wetting maneuver will help ensure the color stays bold and even!
While the shirt was cycling in the dye, I moved onto the hat portion of the costume. To create a hat, you can make one from scratch like I did OR you can always buy a pink beanie base and then add ears if you’re on a time crunch. I feel like Halloween always ends up arriving so quickly, so if you don’t have enough prep time, there are ways to still make it work!
I crafted a pattern similar to one based off of a basic beanie, just adding length on each side to match Louise’s flaps. The circumference around my head was 20 inches and 13 inches from my head to my shoulders.
(The pattern is for one side of the hat, as I’ll be cutting out two layers of fleece at once to double the size.) Hello soon to be hat!
Next on the agenda...the ears and the little rectangular bits that go at the end of each flap. I made freehand patterns and used remnant fleece to create. I trimmed out four of each ear and rectangular piece (2/piece) and pinned them together.
With everything pinned, it was time to stitch! First came the ears...
Then came the flap ends …
To help make the ears stand up, I added wire to the interior of both ears. Little trick...use hot glue to keep the wire in place!
Next it was time to stitch the base of the hat together. The front and back of the hat (where it was pinned) was stitched first, leaving the top of the hat open.
Here’s where the ears come in! I placed the ears on the right side of the fabric facing down and then stitched them together. This will close up the open portion of the hat while setting the ears in place!
The little rectangular bits were stitched to the end of the flaps next, getting this hat ready to go
The final step before being fully costume ready was the t-shirt! It was dyed perfectly and all it needed was a quick take-in! I pinned and then stitched it to make it a smidge smaller.
And with the help of a black bob wig, my Louise Belcher costume was complete!
I just love how the hat looks!
I mean, we’re twins!.
It’s just such a fun costume to wear!
Wearing a wig is always add an extra element of mystique to any costume!
When something is this enjoyable (and pretty simple to DIY) - that calls for a celebration!
Happy Halloween!!!